What it does
A bent metal strip at the roof edge that drips water clear of the fascia.
Free 3D design for any room in your home, siding or roof, before you sign · 10% off for veterans and seniorsFree 3D design · 10% off for veterans and seniors
Roofing · Stockton
A drip edge is the bent metal strip along the roof edge that keeps water off the fascia, and the California code requires it on shingle roofs. Our Stockton garage re-roof used about 100 feet of it in a signed $9,129.92 price; we applied for the City permit ourselves, and it passed final inspection 25 days after issue.
The final invoice matched the signed price, with no change orders. Below: what the California code requires and what our two roof edge jobs included.

A bent metal strip at the roof edge that drips water clear of the fascia.
Required at the eaves and rakes of a shingle roof, lapped 2 inches, nailed every 12 inches or closer.
About 100 feet on a Stockton garage roof, in a signed $9,129.92 price.
Drip edge
A drip edge is an L or T shaped metal strip along the roof edge. It covers the edge of the roof deck and holds water off the fascia, so it drips into the gutter.
The lower, level edge over the gutter. The underlayment laps over the drip edge here.
The sloped sides of a gable. Here the underlayment goes under the drip edge.
The edge of the roof deck and the top of the fascia board, where water would soak in.

The code
The 2025 California Residential Code, section R905.2.8.5, sets five rules for shingle roofs. Each rule has a drawing beside it.

A drip edge at every eave and rake edge of a shingle roof.

Pieces lap each other by at least 2 inches.

It reaches at least 1/4 inch below the roof sheathing and at least 2 inches back onto the deck.

Nailed to the deck no more than 12 inches apart.

Over the drip edge at the eaves, under it at the rakes.
Our job
The garage roof was leaking in several places. The homeowner chose to replace only the garage roof section, about 553 square feet. More about our work in Stockton and on our roofing page.
One layer of old asphalt shingles off, new sheathing at the rotted roof deck, debris hauled away.
Synthetic underlayment over the whole roof, and a self adhered membrane at the eaves and valleys.
About 100 feet of new metal drip edge, new pipe boots, and new step and headwall flashing.
30 year laminated architectural shingles, cool roof rated, with a ridge vent.
We applied for the City of Stockton re-roof permit ourselves (BP26-01182). It went from permit to final inspection between March 2 and March 27, 2026.


See the whole Stockton job, with its photos and the homeowner’s review.
See the Stockton projectGet my free estimateEdge repairs
Water can get behind it and rot the wood under it.
A badly installed metal edge let water rot the fascia and a rake board; see what that $3,350 repair included.

Google review
The homeowner’s Google review of this garage roof, word for word.
They made the replacement for the roof over the garage very simple. No guess work or trying to sell you more. Very good work and at better prices than some other roofers I called. Cleaned up everything when job was done and it looks great.
Darin Selby, Google review
About the author
Our Chief Designer wrote this guide and our general contractor reviewed it.
Chief Designer
Emin is the Chief Designer at US Construction Remodeling Corp. Emin leads client design meetings, measured layouts and 3D visualization in Revit, 3ds Max and Unreal Engine, and uses AI tools to speed up design and project planning.
General Contractor
Umit Sahin is a general contractor at US Construction Remodeling Corp. and oversees construction, permits and inspections on our projects.
Sources
The state roof code, the City of Stockton permit page and our license record.
R905.2.8.5: drip edge at eaves and rakes; R903.2.1: flashing where a roof meets a wall.
Where the City of Stockton lists its re-roof permit and the residential requirements.
Where the California building codes are published.
California contractor license #1117562 on the state license board.
Plan the numbers
Measure the roof first, then count the eaves and rakes.
Outline your roof on a map, or work out shingles and underlayment.
Roof calculatorShingle and underlayment calculatorGet my free estimatePractical questions
Short answers about the code, underlayment, repairs and permits.
Yes, on shingle roofs. The 2025 California Residential Code requires it at the eaves and rake edges (R905.2.8.5).
At the eaves, the underlayment goes over the drip edge. At the rakes, it goes under the drip edge.
Along one edge, yes. On our Sacramento garage we opened the first shingles, replaced the metal edge and the boards under it, and put the shingles back, for a signed $3,350.
Ours needed about 100 feet for a garage roof of about 553 square feet. Measure every eave and rake edge.
We always apply for the permit ourselves. On our Stockton job, the City of Stockton re-roof permit finaled on March 27, 2026.
Plan your project
Send your address and a few photos. We inspect the roof, list the drip edge, flashing and underlayment in a written estimate, and apply for the permit ourselves.
US Construction Remodeling Corp. · CSLB #1117562 · 4424 Freeport Blvd. STE 4, Sacramento, CA 95822
Keep planning
Our roofing service, two roof jobs, the roof cost guide and gutters.