Enter known conditions
Use actual dimensions and the closest matching scope option. Do not hide uncertainty by entering a convenient number.
FREE CONSTRUCTION PLANNING LIBRARY
Construction Calculators & Planning Tools
Turn early measurements and project questions into a more organized starting point. Choose a tool for quantities, scope, system capacity, or an initial budget—then replace assumptions with verified conditions and a written proposal.
24planning tools
4clear categories
0payment details required
Use the output as a planning record. It can help you describe scope and compare assumptions; it cannot see concealed conditions or approve a project.
POPULAR STARTING POINTS
Start with the decision that controls the next step
These tools connect measurements to a practical scope question. Each result explains its assumptions and limitations.
Bathroom Remodel Budget Estimator
Organize scope level, layout work, and finish allowances.
Open tool
Excavation Volume Calculator
Estimate in-place and loose-haul volume with soil and access inputs.
Open tool
Gutter & Downspout Calculator
Plan roof-edge runs, outlets, downspouts, access, and service scope.
Open tool
Shower Glass Enclosure Estimator
Compare dimensions, glass system, hardware, coating, and removal.
Open tool A USEFUL THREE-STEP METHOD01 02 03
Measure, test the scope, then verify
Need a visual record of the room before using a calculator? Explore PlaceAnew room capture and floor-plan review for compatible iPhone and iPad devices. Calculator inputs and critical dimensions still need verification.
Read the assumptions
Review waste, access, removal, preparation, materials, allowances, exclusions, and whether the tool estimates quantity or budget.
Replace estimates with evidence
Confirm field measurements, products, code path, concealed conditions, trade coordination, and written proposal scope before commitment.
8 TOOLS
Roofing & exterior
Roof area, drainage, cladding, water management, exterior access, and site-edge planning.
01
Asphalt Driveway Base Calculator
Estimate driveway area, asphalt, aggregate base, preparation options, and an early planning range.
Open tool 02Dry Rot Siding Repair Calculator
Organize affected siding area, access, repair depth, finish work, and replacement assumptions.
Open tool 03Fence Calculator
Plan fence length, posts, panels, gates, materials, and site variables before field verification.
Open tool 04Gutter & Downspout Calculator
Estimate roof-edge runs, outlets, downspouts, access, cleaning, repair, and replacement scope.
Open tool 05Remote Roof Assessment
Share an address and roof information for an early remote review before an on-site proposal.
Open tool 06Retaining Wall Calculator
Organize wall length, height, drainage, excavation, access, and engineering questions.
Open tool 07Shingle & Underlayment Calculator
Estimate adjusted roof area, roofing squares, underlayment, valleys, starter, and ridge materials.
Open tool 08Siding Calculator
Plan wall area, openings, waste, trim, WRB, flashing, removal, and finish assumptions.
Open tool8 TOOLS
Interior remodeling
Rooms, finishes, cabinets, surfaces, glass, paint, tile, and material-quantity planning.
09
Bathroom Remodel Budget Estimator
Compare bathroom size, scope level, layout work, finish selections, and planning allowances.
Open tool 10Countertop Calculator
Estimate countertop area, edge length, backsplash, cutouts, removal, and fabrication questions.
Open tool 11Drywall & Sheetrock Calculator
Estimate sheets, joint compound, tape, fasteners, waste, and repair or remodel scope.
Open tool 12Flooring Calculator
Turn room dimensions into material quantity, waste, transitions, demolition, and preparation inputs.
Open tool 13Kitchen Cabinet Refacing Calculator
Organize doors, drawer fronts, panels, hardware, finish work, and installation assumptions.
Open tool 14Paint Calculator
Estimate paintable area, coats, doors, trim, ceilings, preparation, and material quantity.
Open tool 15Shower Glass Enclosure Estimator
Compare enclosure style, glass thickness, dimensions, hardware, coating, and removal.
Open tool 16Tile & Grout Calculator
Estimate tile area, waste, grout, trim, pattern effects, and substrate preparation questions.
Open tool4 TOOLS
Building systems
Ventilation, electrical capacity, backup power, and HVAC planning inputs.
17
Bathroom Exhaust Fan Guide
Review room size, ventilation goals, duct routing, controls, noise, and moisture considerations.
Open tool 18Electrical Load & Panel Upgrade Estimator
Organize major loads, service size, electrification plans, and panel-upgrade questions.
Open tool 19Generator & Battery Backup Sizing
Prioritize essential loads, runtime, starting demand, fuel or storage, and transfer requirements.
Open tool 20HVAC Sizing Calculator
Prepare room and building inputs for an early load discussion; equipment still requires professional sizing.
Open tool4 TOOLS
Sitework & structure
Excavation, debris, trenching, and framing quantities for an early scope discussion.
21
Dumpster Size Estimator
Match debris type, approximate quantity, loading constraints, and haul assumptions to a planning size.
Open tool 22Excavation Volume Calculator
Estimate in-place volume, planning allowance, loose haul volume, access, soil, and selected services.
Open tool 23Framing Lumber Calculator
Estimate studs, plates, openings, waste, and early framing quantities for a defined wall layout.
Open tool 24Trench Calculator
Estimate trench volume from length, width, depth, quantity, soil, access, haul-off, and backfill choices.
Open toolPLANNING OUTPUT, NOT PROJECT APPROVAL
What the calculators can—and cannot—tell you
Useful for
- Early quantities and ranges
- Organizing scope questions
- Comparing proposal assumptions
- Identifying missing information
- Preparing for a site review
Requires verification
- Exact field dimensions
- Concealed or damaged conditions
- Code, permit, and engineering decisions
- Product and manufacturer requirements
- Final price, schedule, and availability
ABOUT THE AUTHORS
Who organizes and checks this tools library?
Written by Emin
Chief Designer
Emin is the Chief Designer at US Construction Remodeling Corp. Emin leads client design meetings, measured layouts and 3D visualization in Revit, 3ds Max and Unreal Engine, and uses AI tools to speed up design and project planning.
Reviewed by Umit Sahin
General Contractor
Umit Sahin is a general contractor at US Construction Remodeling Corp. and oversees construction, permits, and inspections on our projects.
The library groups company-developed planning interfaces and homeowner guides. Individual tool pages identify their own inputs, formulas, pricing basis when applicable, limitations, and review date. Last reviewed July 30, 2026. Verify California contractor license #1117562.
TOOLS LIBRARY FAQ
Use a calculator without mistaking the result for a proposal
Are these construction calculators free to use?
Yes. The tools are available for early planning without creating a project account. They help organize measurements, quantities, scope questions, and planning ranges before a field review or written proposal.
Do calculator results constitute a construction quote?
No. A calculator result is not a bid, contract, design, engineering document, permit decision, inspection approval, product order, or guarantee of cost or schedule. Verified dimensions, existing conditions, selections, access, code requirements, and written scope can change the result.
Which calculator should I use first?
Start with the tool that matches the main decision: quantity, budget, system capacity, or sitework volume. If several trades are connected, use the project-level bathroom, roof, excavation, or remote-assessment tool first, then use specialty tools to examine individual allowances.
Can I use the results to compare contractor proposals?
Use results to ask better questions, not to replace proposals. Compare whether each proposal uses the same dimensions, products, demolition, preparation, access, disposal, permits, testing, exclusions, allowances, and change-order assumptions.
Do the tools save personal or payment information?
Most calculators operate as planning interfaces and do not require payment information. Do not enter Social Security numbers, bank information, access codes, identity documents, or other sensitive records. A separate project inquiry may request ordinary contact and project information.
When is an on-site review still necessary?
An on-site review is usually necessary when hidden conditions, structural work, utility capacity, water management, access, safety, exact fabrication, code compliance, or trade coordination can materially affect scope. The written proposal should identify what was field verified and what remains an allowance or exclusion.
WHEN THE TOOL IS NOT ENOUGH
Turn the planning result into a measured scope review
Share the address, requested work, photos or plans, known conditions, priorities, and the result you used. We will review the information and identify the next practical step.
Request a project review