Insulated vinyl
Insulated vinyl averages $8 per square foot (Angi).
Free 3D design for any room in your home, siding or roof, before you sign · 10% off for veterans and seniorsFree 3D design · 10% off for veterans and seniors
Siding · Sacramento cost guide
Most Sacramento homeowners pay $7,655 to $19,864 to replace vinyl siding, about $13,290 on average.
Those are Angi’s September 2026 market numbers for Sacramento, checked November 3, 2026. Our own latest siding job, in fiber cement, was $30,450; what it included is below. The price follows the wall area, the siding grade and what is found when the old siding comes off.

Market prices
Angi’s figures come from projects its pros reported; Cost vs. Value prices one defined job for Sacramento.
| Usual range | Average | |
|---|---|---|
| Sacramento | $7,655 to $19,864 | $13,290 |
| National | $6,368 to $18,377 | $12,303 |
| Per square foot, installed | $3 to $12 |
| Cost | Recouped at resale | |
|---|---|---|
| Vinyl | $18,019 | 87% |
| Fiber cement | $22,287 | 108.3% |
Insulated vinyl averages $8 per square foot (Angi).
Labor is 30% to 50% of the total (Angi).
Replacing 1,250 sq ft of siding with factory trim at the openings and corners, over a continuous weather barrier.
Our price
The signed price of a Sacramento County siding replacement we completed in 2026, from our own records. It was fiber cement, not vinyl.
After our senior discount, with the permit and inspection fees included.
About 1,550 sq ft of wall: the old siding taken off and hauled away, new plywood sheathing on every included wall, a weather barrier, flashing at the openings, James Hardie lap siding, and Hardie trim at the corners, windows, doors and fascia.
Roofing. Any framing repair found under the old siding was priced separately, in writing, before the work.
The first payment was $1,000, within the California limit.
See the photos and video of this siding job.
By wall area
Siding is priced by the square foot of wall, not of floor.
Wall length times height, minus large openings like garage doors. A two-story house usually has more wall than a one-story house with the same floor area.
1,250 sq ft of wall at Angi’s $3 to $12 per square foot comes to $3,750 to $15,000.
Cost vs. Value prices the same 1,250 sq ft, with trim and new house wrap, at $18,019 in Sacramento, about $14.42 per square foot.
Removal, trim, soffits and any rot under the old siding are priced on top. See the extras below.
Extras
Angi’s 2026 ranges for the line items that come up most.
$1,000 to $3,000.
$1,500 to $3,000.
Soffits $1,000 to $4,000; fascia $1,000 to $3,300.
$0.50 to $2 per square foot.
$500 to $5,000. If we find hidden damage under the old siding, the repair and its price go in writing before we do it.
Repair or replace
A few damaged panels rarely need a whole new wall.
Cracked, loose or holed panels in one area can be replaced piece by piece. See vinyl siding repair.
Widespread warping, fading or water getting behind the siding on several walls usually points to replacement.
Fiber cement costs more but recouped more at resale in Sacramento. See Hardie siding cost.
Fire rule
Check whether the house is in a wildfire hazard area before choosing the material.
In wildfire hazard areas, the WUI Code allows siding that is noncombustible, ignition-resistant, fire-retardant-treated wood, or part of an approved wall assembly such as 5/8 inch Type X gypsum behind it.
The normal building code applies. Ask your city whether a permit is needed for your siding job.
Our work
A Sacramento County home we re-sided, in the same order a vinyl job follows.
We took off the old siding, put house wrap on the walls and prepared the window openings.
James Hardie lap siding and white trim went on, around the garage doors too. See the project.
We quote vinyl tear-off and new vinyl lap siding, and repair damaged vinyl sections.


See our siding page.
About the author
Our Chief Designer wrote this guide.
Chief Designer
Emin is the Chief Designer at US Construction Remodeling Corp. Emin leads client design meetings, measured layouts and 3D visualization in Revit, 3ds Max and Unreal Engine, and uses AI tools to speed up design and project planning.
Sources and related pages
The cost pages and code behind this guide, checked November 3, 2026.
Planning tools
Measure your walls with the siding calculator, or size a rot repair with the dry rot calculator.
Vinyl siding questions
Short answers from the same sources.
Siding is priced by wall area, not floor area. Angi’s Sacramento range is $7,655 to $19,864. A two-story house usually has more wall than a one-story house with the same floor area, so measure the walls first.
Angi lists $3 to $12 per square foot installed. Cost vs. Value prices a 1,250 sq ft Sacramento job with trim and house wrap at $18,019, about $14.42 per square foot.
Angi lists $1,000 to $3,000 for removing old siding. Repairs to rot or water damage found under it run $500 to $5,000.
In Sacramento, Cost vs. Value 2025 shows fiber cement siding recouping 108.3% of its cost at resale and vinyl 87%.
Our latest Sacramento County siding replacement was $30,450 after our senior discount: about 1,550 sq ft of James Hardie fiber cement with new plywood on every included wall, a weather barrier, flashing, trim and the permit. We quote vinyl the same way, in writing.
Yes. We repair damaged vinyl sections as well as replace whole walls, and references are available on request.
No more than $1,000 or 10% of the price, whichever is less, under California law.
A full new siding installation carries our 10-year workmanship warranty, with the first 2 years full. Repairs are not part of it; the repair terms are written in your repair contract.
Siding in the Sacramento area
Send the address and a few photos of the walls. We measure, price the job and list any repair separately.